The Apple iPhone smartphone includes an advanced alarm clock that lets you set and manage multiple alarms. After setting iPhone alarms to wake you in the morning or remind you of an appointment, you can change the notification setting that controls the alarm sound, time, label, repeat function and snooze feature. Configure alarm settings in the “Clock” application that comes as a standard feature on all iPhones. Tips Writer Bio
Your iMac features a high-definition screen that you can set to several different resolutions using the computer’s System Preferences panel. Changing the resolution may prevent some applications from fitting entirely on your screen and can therefore limit your access to menus and other on-screen functionality. Tips Warnings Writer Bio
Hewlett Packard computers typically start out well, but become bloated as they age. Or, you might be annoyed at the fact that when you buy an HP computer, it comes with trial software you might never use. In both cases, one possible solution is to clean and erase the hard drive that came with your HP computer, eliminating everything on it to be rebuilt anew. Warnings Writer Bio
Tips Warnings Writer Bio
Cloning an iPod is just a matter of getting the information (e.g., songs, movies, etc.) from one iPod to another. There is no button in iTunes to copy or transfer your tunes. Software like Podmaxx, CopyTrans and Touchcopy will clone an iPod for a fee. However, you can do it yourself with just a few clicks of the mouse.
Yamaha audio-video receivers are equipped with different connection jacks for hooking up a variety of home theater equipment, including a powered subwoofer. The sub connects to the Yamaha receiver with a dedicated cable to deliver deep, low-frequency bass that adds to the home theater experience. A powered subwoofer contains its own built-in amplifier, so the component will not make demands on the Yamaha receiver. Warnings Writer Bio
The AirPort Extreme router takes the signal from your cable modem and distributes it over a wireless area network so multiple devices can connect to the Internet. Use an Ethernet cable to make the connection between the modem and the AirPort router. Once the connection is made, the Airport Extreme will immediately begin sending out a signal to your Wi-Fi enabled devices. Writer Bio
There’s no denying the convenience of a digital video recorder from your cable or satellite provider to time-shift your favorite shows, ensuring you don’t miss an episode despite your busy schedule. Connecting modern DVRs to flat panels like Sony’s Bravia line is a quick process, thanks to the one-cable convenience afforded by HDMI cabling. Writer Bio
Closed-circuit television( CCTV) is commonly associated with security cameras. The security camera captures video and transmits it to a monitoring station and/or recording device. Connecting a CCTV camera to a consumer TV is extremely simple and requires only the use of a coaxial or RCA cable to be run from the camera to the TV. Both of these types of cable can be purchased at any electronics store for a low cost....
The Nook lets you take PDF files and other electronic documents on the go. The device contains a pre-installed store application, letting you purchase and download files directly from the Nook interface. If you want to take full advantage of the Nook’s capabilities, you may also add files directly from your personal computer. The connection process is quick and direct. Warnings Writer Bio
The Retrolink USB controller brings back the feelings of early gaming days with a controller designed off early Nintendo video game systems. The controller utilizes the USB interface to connect to your computer and is compatible with both Mac and Windows-based computers. Connect the Retrolink USB controller to enjoy gaming with a throwback feel on your iMac. Writer Bio
To communicate with the Canon Pixma MX860 over a Wi-Fi connection, you must provide the Canon Pixma with the information it needs to sign on to your wireless network, then install the device driver for the printer to your computer. Unlike many other wireless printers, you don’t connect the Canon to your network using its control panel. Instead, you run the installation software on your PC and select the appropriate hot spot from within the setup wizard....
Networking is the pinnacle of modern technology. It is the communication of interconnected devices such as computers, printers, vehicles and smart devices. Achieving the ability to transmit and receive information was an amazing beginning to networking, but it found limits in the use of physical media (e.g. cables and wires.) However, with today’s technology, networking can greatly surpass its former limitations by leaving the wires behind and going wireless. Connecting an office or two buildings in an office wirelessly is a simple but highly effective step toward getting the most from a network....
A VU meter is an essential device that lets you monitor the audio levels in a circuit. This tells you if the volume of the audio is too loud for your equipment to handle, which would cause distortion, a usually undesirable effect caused by overly loud audio. Based on old analogue technology, the meter has a set of numbers written on it. In the negative range (say -48 to 0) the audio is at the appropriate level....
If you have a JPEG image file that you would like to save as an MVI file, you can convert it in a few simple steps. Understand that .jpg is a file extension for a still image, while .mvi is a file extension for a small movie or a clip of moving images. Writer Bio
An OBJ file is a 3-D image file that contains 3-D coordinates and texture maps. It is a graphics software file compatible with several graphics programs such as Meshlab, Newtek Lightwave 3D and Wavefront 3D. The MB file is a graphics file created by the Autodesk Maya program and is compatible with Autodesk applications; it isn’t, however, compatible with other graphics programs. If you want to view your MB file in other applications, the Autodesk Maya does have a converter features so you can convert your MB file to an OBJ file....
To fit very large video files on disks and websites, encoding software must convert the raw video to compressed formats. For a video you’ll watch on a DVD player, use an MPEG-2-conversion program to convert the video. The University of Texas website states that video-encoders reduce the size of video files by separating the color information from the brightness and removing some of the color information. Codec algorithms also reduce file sizes by altering frame rate information....
M-JPEG (Motion Joint Pictures Export Group) files, or simply “Motion JPEGs,” package a sequence of JPEG images into a single file. The JPEG frames are captured from a video input or converted from another file format. Whether you need to convert your video into the M-JPEG format or you want to capture a video stream in the format, you can find a solid selection of M-JPEG–compatible conversion software online.
The MeetMe social networking service allows you to meet and befriend new people online. The service is free and you have the option to video chat or play games with other members. If you find that you no longer want to make use of the service, it is possible to deactivate your account. Doing so will prevent other members from contacting you and it will remove all your details from the site....
Saving Your Images Account deactivation permanently removes all of your images, so it may be a good idea to use an exporting service such as Instaport or Downgram (see links in Resources) to save any pictures you want to keep. These services create a zip file containing the images you select, which is then saved on your hard drive. The Deactivation Process On your profile page, click your username and select the “Edit Profile” option....
